If you are into Railroad - You Need This Stuff. Full Size, Old Railroad Signal Lights, Crossing Gate, parts and such This is Vintage, "older" stuff. Some things work just fine - it is all: as is, as found and collected. Loading refreshments can be arranged. Clear 8 1/2 ribbed lens.
12 MI p/n 01510048 reflectors, with no central hole. 20" steel Safetran black light rings, 8 1/2" central hole -new. 20" steel Safetran black light rings, 8 1/2" central hole - unused. Mix of steel and aluminum light visors - used, a little bent but fixable. Aluminum light back rings, 12 1/4 holes, need flattened.
Also a few boxes of misc. Aluminum lids and parts, some iron parts, and electric parts, abt. 100lbs Lights, several with fittings, arms to make pairs and quads , also some misc.Arm parts included, sets complete or as parts. Transport Products, Model P light, red 8 1/2 lens, w/backs and visors. Western-Cullen-Hayes red lights - 12 1/4 lens. Harmon red lights - 12 1/2 lens, 9 with fixable back rings and visors. Safetran red lights - 12 1/2 lens.
Harmon red lights, 12 1/2 lens - all need repairs, 4 replace reflectors, 5 replace lens. Safetran Systems red lights - 12 1/2 lens - replace lens. Lights from 30's to early 1960's I've been told. You tell me what you see, please? 1 ea Safetran Systems crossing gate controller, with 2ea.
Counter weights, 2 x 14' gate arms and 2 x 8' gate arms Works fine there is a spare of the red dc motor, if you want it. Vintage Railroad RR Crossing Bell, 12 Diameter, 12 V, Train, Antique, Made by Railroad Accessories Corp. New bolt to secure back. Crossing gate arm catcher, aluminum Model 235774-08, mounts on pole next to rail Crossing gate mounting post.
Crossing gate post: 8' tall, 6" diameter, on 17" iron mounting box with some electrical distribution strips, with cap (to remove if bell is mounted). Also, if you want it, a spare crossing gate post aluminum base will go with. This is a one lot deal, you come pick it up. Nothing has been "cleaned up", all original "patina" remains. Everything has been moved to Pueblo and put in a pole shed.I don't want to get complaints that I had ruined the value by incompetently cleaning anything. All is a bit dusty now. You need to either pick it all up or send someone to arrange the transport.
I will help pack and load free, but a couple helpers with you would be best, maybe an enclosed 12' UHaul with moving blankets (like I used to bring it all here) would be best. An open trailer could blow all the dust off, with moving blankets and a little rain would help clean. There are some pails and boxes with misc. Other parts, covers and hardware that will be included.
Everything railroad in the pix will be included. I can arrange to have the trailer here and loaded to go - just will cost you more if I do it. Just a few parts are needed to make all the units whole.No really wrecked units are here, I don't even think any sandblasting is needed. Probably a really good clean water small firehose nozzle spraying. All is located in the Baxter road area, off Business 50 a few miles East of Pueblo CO.
Ask for more photos, or if you have questions. Full Size, Old Railroad Signal Lights, Crossing Gate, parts and such You Need This Stuff.
The item "Full Size, Old Railroad Signal Lights, Crossing Gate, Crossing Bell, Misc. Stuff" is in sale since Monday, May 25, 2020. This item is in the category "Collectibles\Transportation\Railroadiana & Trains\Hardware\Lanterns & Lamps".
The seller is "mlow" and is located in Pueblo, Colorado. This item can't be shipped, the buyer must pick up the item.